How to Choose the Right Angle Grinder: Corded, Cordless or Air
Choose an angle grinder in five steps
The right angle grinder is the one that matches your work: decide the job, the disc size, the power source, the safety features and the running costs, in that order.
The most powerful grinder is not automatically the best one. This guide walks through the five decisions UK buyers make, from 115mm, 125mm and 230mm disc sizes to corded, cordless and air power.

In This Article
- Step 1: Start with the job and the material
- Step 2: Choose the disc size
- Step 3: Choose corded, cordless or air power
- Step 4: Check speed, control and safety features
- Step 5: Check discs, compatibility and total cost
- M7 angle grinders compared
- Final checklist before you buy
- Sources and specification notes
- Frequently Asked Questions
Step 1: Start with the job and the material
Define what the grinder will do most of the time, because the job decides the disc, the size and the power you need.
An angle grinder cuts, grinds, cleans and finishes. The accessory does the work, so match it to the material:
| Job | Typical accessory | Typical materials |
|---|---|---|
| Cutting section, sheet, pipe and bar | Thin cutting disc | Mild steel, stainless steel |
| Removing weld and stock | Grinding disc | Steel fabrications |
| Blending and finishing | Flap disc | Welds, edges, surfaces |
| Removing rust, paint and scale | Wire brush or wire wheel | Steel, concrete surfaces |
| Cutting masonry, paving and tile | Diamond blade rated for the material | Concrete, stone, tile |
Can you use an angle grinder on wood?
It is possible with accessories made for wood, but the kickback risk is higher, and a saw is usually the safer tool. If you do, fit only an accessory its maker rates for wood and for your grinder’s speed, and keep the guard in place.
Step 2: Choose the disc size
Choose 115mm or 125mm for general metalwork and site work; choose 230mm only when the job needs its extra cutting depth.
| Disc size | Best suited to | Trade-off |
|---|---|---|
| 100mm (4″) | Tight spaces and light finishing | Least cutting depth |
| 115mm (4-1/2″) | Detailed work, frames and confined fabrications | Less depth than 125mm |
| 125mm (5″) | General cutting, weld grinding and site work | Needs a little more clearance |
| 230mm (9″) | Deep cuts in masonry and heavy section | Heavier, two-handed, harder to control |
For a detailed comparison of the two most common sizes, see 115mm vs 125mm Angle Grinder: Which Size Should You Choose?
What spindle thread do UK angle grinders use?
Most 115mm and 125mm grinders use an M14 spindle; some tools are offered with a 5/8″-11 spindle instead. Check the thread before you buy discs, flanges and accessories. Smaller 100mm grinders may use a different thread, such as M10.
Step 3: Choose corded, cordless or air power
Choose by where you work: corded for long runs at a fixed point, cordless for mobility, air for workshops already running compressed air.

| Factor | Corded | Cordless | Air (pneumatic) |
|---|---|---|---|
| Power source | Mains or 110V site supply | Battery and charger | Compressor and air line |
| Best for | Long, continuous work in one place | Moving around a site, working at height or outdoors | Workshops, fabrication shops and production lines |
| Plan for | Leads and, on many UK sites, a 110V transformer | Battery capacity and charging | Compressor capacity, hose and air quality |
Which power source suits UK sites?
Cordless avoids trailing leads and transformers at the point of work. Many UK construction sites run portable hand tools on 110V reduced low voltage; BS 7671 strongly prefers it for portable hand tools on construction sites, as NICEIC explains. Confirm what your site requires against its risk assessment and HSE’s Electrical safety on construction sites (HSG141).
Are cordless angle grinders any good?
For most cutting, grinding and finishing, yes, if you plan battery capacity for the work. A cordless angle grinder with a battery and charger kit suits buyers new to a platform; a bare tool suits those already running the same batteries. Compare M7’s 18V models in Which 18V Cordless Angle Grinder Is Right for You?

When is an air angle grinder the better choice?
When compressed air is already in place and the tool runs for long periods. An air grinder has no motor windings or battery, so the body can be compact. Check that your compressor can supply the grinder’s stated air consumption at the stated pressure.
Step 4: Check speed, control and safety features
Look for features that keep the guard in use and the tool under control, not just a higher RPM.
- Tool-less adjustable guard: operators reposition it instead of removing it.
- Spindle lock: quicker, more controlled disc changes.
- Side handle positions: two hands on the tool in awkward positions.
- Switch type: lock-on or non-locking; match it to your site’s risk assessment.
- Speed control: lower speeds suit wire brushing, polishing and heat-sensitive work.
What safety rules apply to angle grinder discs?
The disc’s marked maximum speed must be at or above the grinder’s speed, and the guard must stay in place. HSE Northern Ireland’s guidance also requires eye protection for dry grinding. HSE’s Safety in the use of abrasive wheels (HSG17) covers training, disc mounting and portable grinders.
- Never fit a disc larger than the grinder is designed for.
- Never use a cracked or damaged disc.
- Wear eye protection, and hearing, hand and respiratory protection as the task requires.
Step 5: Check discs, compatibility and total cost
Compare the whole working system, not just the tool price.
- Disc diameter and spindle thread, so discs and flanges fit
- Disc types you will stock: cutting, grinding, flap, wire brush and diamond
- For cordless: which batteries and charger are included, and which tools share them
- For air: hose size, air inlet and compressor capacity
- Tool weight and length for the operator
- Local supply of discs and spares, warranty and distributor support
M7 angle grinders compared
The M7 models compared here are cordless and air angle grinders from 100mm to 125mm. Figures are taken from M7’s product pages and catalogue.

M7 cordless angle grinders (18V)
| Model | Disc | Motor | No-load speed | Net weight (bare tool) |
|---|---|---|---|---|
| DG-501 | 125mm (5″) | Brushless | 8,000 RPM | 2.2 kg (4.8 lb) |
| DG-585 | 125mm (5″) | Brushless | 8,000 RPM | 2.2 kg (4.8 lb) |
| DG-502 | 125mm (5″) | Brushless | 4,000 / 6,000 / 8,500 RPM | 1.6 kg (3.52 lb) |
| DG-485 | 100mm (4″) | Brushed | 8,000 RPM | 2.2 kg (4.8 lb) |
The DG-585 is also sold as the DG-585502 [KIT], listed at 2.96 kg (6.52 lb), with a tool-less adjustable guard, spindle lock, 2-position handle and lock-on switch. Kit contents vary by market, so confirm the batteries and charger with your distributor.
M7 air angle grinders (100° head, lever throttle)
| Model | Disc | Motor | Free speed | Air use at 90 PSI (6.3 bar) |
|---|---|---|---|---|
| QB-7245 (S/M) | 115mm (4-1/2″) | 1.3 HP | 11,000 RPM | 4.2 CFM (119 L/min) |
| QB-7215 (S/M) | 125mm (5″) | 1.3 HP | 11,000 RPM | 4.2 CFM (119 L/min) |
| QB-7315 (S/M) | 125mm (5″) | 2.3 HP | 10,000 RPM | 6.9 CFM (195 L/min) |
All three air models weigh 1.8 kg (4.0 lb) and take a 5/8″-11 / M14 x P2.0 spindle. The QB-7315 offers more motor output and needs a 1/2″ air hose; the QB-7245 and QB-7215 use a 3/8″ hose. See all M7 air angle grinders and M7 cordless angle grinders.

Which M7 angle grinder suits which job?
Pick the power source first, then the disc size.
- Site work away from power, 125mm: DG-501 for speed control, DG-502 where weight matters most, DG-585 for a lock-on switch.
- Compact cordless work: DG-485 (100mm).
- Workshop with compressed air, detailed work: QB-7245 (115mm).
- Workshop with compressed air, general cutting and grinding: QB-7215 (125mm), or QB-7315 for more motor output.
Final checklist before you buy
Answer these five questions and the right grinder usually becomes clear.
- What job and material will I tackle most often?
- Which disc size gives enough depth without losing control?
- Corded, cordless or air: what power is available where I work?
- Which guard, switch and handle features does my risk assessment need?
- Do the discs, batteries or air supply and local support suit the whole system?
For pricing, stock and the right kit for your work, talk to your local M7 distributor.
Further reading
- 115mm vs 125mm Angle Grinder: Which Size Should You Choose?
- Which 18V Cordless Angle Grinder Is Right for You?
Sources and specification notes
Specifications come from M7’s product pages and catalogue; safety and electrical guidance come from UK bodies.
- M7 cordless models: product pages for DG-501, DG-585, DG-585502 [KIT], DG-502 and DG-485.
- M7 air models: M7 catalogue, air angle grinder section (p.64), checked on 29 October 2026.
- Disc speed, guards and eye protection: HSE Northern Ireland, Abrasive wheels information sheet.
- Training and portable grinders: HSE, Safety in the use of abrasive wheels (HSG17).
- Site electrical supply: NICEIC on BS 7671 Section 704 and HSE HSG141.
Frequently Asked Questions
What is an angle grinder used for?
Cutting metal, grinding welds, removing rust and paint, and finishing surfaces. With a diamond blade rated for the material, it can also cut concrete, stone and tile.
What size angle grinder should I buy?
For most metalwork and site work, 115mm or 125mm. Choose 125mm for more cutting depth and 115mm for tighter spaces; 230mm suits deep cuts in heavy material.
Are cordless angle grinders as good as corded?
For most cutting, grinding and finishing, a cordless angle grinder does the job and removes the lead. For long, continuous cutting, plan enough battery capacity or choose corded or air power.
Can I use a 240V angle grinder on a UK building site?
Many UK sites require 110V reduced low voltage for portable hand tools, so check the site rules and risk assessment first. Cordless and air grinders avoid mains leads at the point of work.
Are angle grinder discs universal?
No. Discs must match the grinder’s diameter and spindle, and their maximum speed must be at or above the grinder’s speed. Check the disc marking before fitting it.
Contact us, or talk to your local distributor